What is DISK CONTROLLER? What does DISK CONTROLLER mean? DISK CONTROLLER meaning & explanation
June 2, 2018 Jon 0 Comments
What is DISK CONTROLLER? What does DISK CONTROLLER mean? DISK CONTROLLER meaning – DISK CONTROLLER definition – DISK CONTROLLER explanation.
Source: Wikipedia.org article, adapted under https://creativecommons.org/licenses/by-sa/3.0/ license.
SUBSCRIBE to our Google Earth flights channel – https://www.youtube.com/channel/UC6UuCPh7GrXznZi0Hz2YQnQ
The disk controller is the controller circuit which enables the CPU to communicate with a hard disk, floppy disk or other kind of disk drive. Also it provides an interface between the disk drive and the bus connecting it to the rest of the system.
Early disk controllers were identified by their storage methods and data encoding. They were typically implemented on a separate controller card. Modified frequency modulation (MFM) controllers were the most common type in small computers, used for both floppy disk and hard disk drives. Run length limited (RLL) controllers used data compression to increase storage capacity by about 50%. Priam created a proprietary storage algorithm that could double the disk storage. Shugart Associates Systems Interface (SASI) was a predecessor to SCSI.
Modern disk controllers are integrated into the disk drive. For example, disks called “SCSI disks” have built-in SCSI controllers. In the past, before most SCSI controller functionality was implemented in a single chip, separate SCSI controllers interfaced disks to the SCSI bus.
The most common types of interfaces provided nowadays by disk controllers are PATA (IDE) and Serial ATA for home use. High-end disks use SCSI, Fibre Channel or Serial Attached SCSI. Disk controllers can also control the timing of access to flash memory which is not mechanical in nature (i.e. no physical disk).
The correct term for the component that allows a computer to talk to a peripheral bus is host adapter or host bus adapter (HBA). On the other hand, a disk controller allows a disk to talk to the same bus. Those two are often confused, especially in the PC world. In fact signals read by a disk read-and-write head are converted by a disk controller, then transmitted over the peripheral bus, then converted again by the host adapter into the suitable format for the motherboard’s bus, and then read by the CPU.
Sometimes there may be yet another controller between a host adapter and a disk controller – a disk array controller that allows hardware RAID to be formed. Sometimes it may be even physically integrated with an HBA, but it performs different functions.
Video Rating: / 5
- How to Use Hard Disk as USB Flash Drive [Plug & Play]
- Secondary Storage (Hard Disk , Floppy Disk , Zip Disk ,etc ) Lecture -11 For LIC AAO , IBPS , SBI
- how to change hard disk serial number [ Windows XP/7/8/10] HD 2018
- HP LTO-2 Tape Technology Efficiently Secures Your Data
- The 10000 RPM SCSI experience with the Hitachi Ultrastar 10K300